CAMI Leather Kit - BLACK 5-5.5 oz.

Leather handles and strap connectors for the Cami bag pattern.  Each kit is cut from high-quality veg-tanned cowhide leather that has been precut and hole-punched with rounded ends.   
 
Leather Weight:  5-5.5 oz
Color: Black 
Temper: Semi-Firm (will soften with use)
Burnishable:  Yes
 
*You now have the option of purchasing your pre-punched set with either 3/4" wide or 1" wide handles and handle connectors.  There is also an option for "extended" side strap connectors that have two-rivet holes on each side instead of one (requires minor pattern modification).  See the attached video before making these selections!*
 
•(2) 18” Leather Handles (or  ¾” wide if you prefer)
•(4) Handle Connectors - 1" Wide (or  ¾” wide)
•(2) Side Strap Connectors - ¾” Wide (see video for option for "extended" side strap connectors)
•(2) Adjustable Strap Accents - 1" Wide
•(12) Leather Washers - ½” Diameter
 
~If you choose the ¾” wide handles, there is no need to modify any of the pattern steps or measurements. You would simply swap the 1" handles and handle connectors out for the ¾” width and proceed with the pattern as written. ~
 
~If you choose the "extended" side strap connectors, you will need to add an additional hole on each corner of the bag for the side strap connectors when you reach step 6a.  Make your first hole per the pattern, then punch a second hole an additional ½” over (so there should be ½” between the two holes to match the distance of the holes in the extended strap connector).~
 
*All holes are pre-punched EXCEPT those needed for the Adjustable Strap Accents. These holes are left unpunched because the location of the holes can vary based on the thickness of the webbing used for the strap.  PLEASE NOTE: The holes are punched for small rivet sizes and may need to be enlarged for larger rivets.